1. Home
  2. Knowledge Base
  3. DISH Network Technical Support
  4. How do I set up my Over the Air Module (OTA Module)

OTA MODULE SETUP The Over-the-Air (OTA) Module allows you to connect an over-the-air antenna like a pair of rabbit ears or a rooftop antenna to a compatible receiver model (222k, 722k, and 922).To determine if you have a compatible DISH Network receiver, check the model name on the front of your receiver.

By connecting an over-the-air antenna, your DISH Network receiver will be able to view and, in the case it is the 722k and 922, record additional locals channels in your area.

***SET UP***

1. Locate the cover on the left side of the back panel on your DISH Network receiver. Using a Phillips head screwdriver remove the two screws attaching the cover to the receiver. You can dispose of the cover, but you will need the screws for the next step.

2. Carefully slide the Over-The-Air Module into the module port, making sure the labeling on the module is right-side up. Attach the module using the two screws that were removed in the previous step.

3. Connect the cable from your over-the-air antenna to the OVER-THE-AIR ANTENNA IN port on the module. Note** you will need an over the air antenna to connect to the Module.

Call Microcom for assistance in purchasing one today; we have several interior/exterior selections in stock 1-907-264-3474

Was this article helpful?

Related Articles